Lantronix MatchPort b/g Pro Command Reference Manual page 163

topic init disable
topic init enable
topic ioctl disable
topic ioctl enable
topic proc disable
topic proc enable
topic pwsv disable
topic pwsv enable
topic rx disable
topic rx enable
topic scan disable
topic scan enable
topic tx disable
topic tx enable
write
wlan profiles (config-profiles) level commands
apply wlan
clrscrn
create <profile name>
delete <profile name>
edit <profile name>
exit
show
show history
write
wpax (config-profile-security-wpax:default_infrastructure_profile) level commands
apply wlan
authentication 802.1x
authentication psk
clrscrn
default authentication
default eap-ttls option
default encryption
default ieee 802.1x
default peap option
eap-ttls option chap
eap-ttls option eap-md5
eap-ttls option eap-mschapv2
MatchPort® b/g Pro Embedded Device Server Command Reference
Disables this WLAN verbosity topic.
Enables this WLAN verbosity topic.
Disables this WLAN verbosity topic.
Enables this WLAN verbosity topic.
Disables this WLAN verbosity topic.
Enables this WLAN verbosity topic.
Disables this WLAN verbosity topic.
Enables this WLAN verbosity topic.
Disables this WLAN verbosity topic.
Enables this WLAN verbosity topic.
Disables this WLAN verbosity topic.
Enables this WLAN verbosity topic.
Disables this WLAN verbosity topic.
Enables this WLAN verbosity topic.
Stores the current configuration in permanent memory.
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
Clears the screen.
Create a new profile name
Delete existing profile by name
View or edit an existing profile
Exits to the config level.
Show existing profile names
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
Sets the authentication method to IEEE 802.1x.
Sets the authentication method to PSK.
Clears the screen.
Restores the authentication method to the default value
(PSK).
Restores the eap-ttls protocol options to the default (EAP-
MSCHAP V2).
Restores the encryption type to the default value (none
enabled).
Restores the default IEEE 802.1x protocol, EAP-TTLS.
Restores the PEAP authentication protocol options to the
default
(EAP-MSCHAP V2).
Sets the EAP-TTLS authentication protocol option to
CHAP.
Sets the EAP-TTLS authentication protocol option to EAP-
MD5.
Sets the EAP-TTLS authentication protocol option to EAP-
MSCHAP V2.
5: Commands and Levels
163