Lantronix MatchPort b/g Pro Command Reference Manual page 103

tcp keep alive <milliseconds>
validate certificate disable
validate certificate enable
vip disable
vip enable
vip name <text>
write
host 2 (config-host:2) level commands
clrscrn
default protocol
default remote port
exit
host <number>
name <text>
no name
no remote address
no ssh username
protocol ssh
protocol telnet
remote address <text>
remote port <number>
show
show history
ssh username <text>
write
host 3 (tunnel-connect-host:2:3) level commands
address <text>
aes decrypt key <hexadecimal>
aes decrypt key text <text>
MatchPort® b/g Pro Embedded Device Server Command Reference
Enables TCP keep alive for connect mode tunneling and
sets the timer.
<milliseconds> = timer value, in milliseconds.
Skips verification of the server certificate when connect-
ing.
Requires verification of the server certificate when con-
necting.
Makes connections using the specified Address.
Makes connections using the VIP name.
Sets the VIP name.
Stores the current configuration in permanent memory.
Clears the screen.
Restores the default value of the protocol (Telnet).
Sets the remote port (used to connect to the host) to the
default value,
which depends on the selected protocol.
Exits to the configuration level.
Change to config host level
Sets the name of the host.
<text> = name of the host.
Clears the name of the host.
Clears the remote address of the host.
Clears the SSH username associated with the host.
Sets the protocol to SSH.
Sets the protocol to Telnet.
Sets the IP address of the remote host to connect to when
this host is
selected on the login connect menu.
<text> = IP address.
Sets the remote port used to connect to the host.
<number> = port to be used.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Sets the username for logging into the host via SSH.
<text> = username.
Stores the current configuration in permanent memory.
Sets the remote host to establish tunneling connections
with.
<text> = IP address or host name of the remote host.
Sets the connect tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
Sets the connect tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by a single character.
5: Commands and Levels
103