Lantronix MatchPort b/g Pro Command Reference Manual page 89

auto show statistics
clrscrn
default protocol
default tcp keep alive
exit
no address
no aes decrypt key
no aes encrypt key
no port
no ssh username
no tcp keep alive
no vip name
port <number>
protocol ssh
protocol ssl
protocol tcp
protocol tcp aes
protocol telnet
protocol udp
protocol udp aes
show
show history
show statistics
ssh username <text>
tcp keep alive <milliseconds>
validate certificate disable
validate certificate enable
vip disable
vip enable
vip name <text>
write
host 13 (config-host:13) level commands
clrscrn
default protocol
default remote port
MatchPort® b/g Pro Embedded Device Server Command Reference
show connection statistics
Clears the screen.
Restores the default protocol as "TCP".
Restores the default 45 second connect mode TCP keep
alive timeout.
Exits to the next higher level.
Removes the remote host address used to establish tun-
neling connections.
Removes the connect tunnel AES decrypt key.
Removes the connect tunnel AES encrypt key.
Removes the remote port used to establish tunnel con-
nections.
Removes the SSH user name.
Disables the connect mode TCP keep alive timeout.
Removes the VIP name.
Sets the remote port to use for connect mode tunneling.
<number> = number of the port to use.
Uses SSH protocol for connect mode tunneling.
Uses SSL protocol for connect mode tunneling.
Uses TCP protocol for connect mode tunneling.
Uses TCP protocol with AES encryption for connect mode
tunneling.
Uses Telnet protocol (with IAC) for connect mode tunnel-
ing.
Uses UDP protocol for connect mode tunneling.
Uses UDP protocol with AES encryption for connect mode
tunneling.
Shows the current configuration.
Displays the last 20 commands entered during the current
CLI session.
show connection statistics
Sets the SSH user name for use when establishing tun-
neling connections
with other devices.
<text> = SSH user name.
Enables TCP keep alive for connect mode tunneling and
sets the timer.
<milliseconds> = timer value, in milliseconds.
Skips verification of the server certificate when connect-
ing.
Requires verification of the server certificate when con-
necting.
Makes connections using the specified Address.
Makes connections using the VIP name.
Sets the VIP name.
Stores the current configuration in permanent memory.
Clears the screen.
Restores the default value of the protocol (Telnet).
Sets the remote port (used to connect to the host) to the
default value,
which depends on the selected protocol.
5: Commands and Levels
89