Margin Shift; Using The Auto Center Feature - Xerox DocuColor 2240 User Manual

U G ( C
S E R U I D E O P I E R
No Shift
Auto Center
Corner Shift
Variable Shift
1 – 3 8
)

Margin Shift

The Margin Shift feature allows you to shift the position of the
image on the copy. The image can be centered on the copy or
moved to the top, bottom, left or right. When copying both sides,
different settings can be set for Side 1 and Side 2.
The following types of Margin Shift are available:
Copies are made without shifting the original. This is the default
setting.
Select this to center an image on the copy when the original and
copy paper are a different size. It may also be used to center a
reduced or enlarged image on the output paper.
Select this to move your image to a specified corner.
Select this to move your image up, down, left or right by entering
in a value. The range is from 0 to 50mm in 1mm increments.

Using the Auto Center Feature

1
On the Added Features tab select Margin Shift.
2
Select Auto Center.
3
Select Start to make copies or Save to select additional features.