Beyond WBYBM2 Owner's Manual page 24

Breadmaker Owner's Manual
To use the scanning wand:
Locate the barcode on the packaged mix you wish to pre-
1.
pare. On the Breadmaker's control panel, press SCAN. A
red light will come on in the end of the scanning wand.
Whenever you press SCAN, the Scan icon on the display
will come on. You can press Stop/Cancel to stop the
scanning.
Hold the scanning wand as you would hold a pencil. Touch
2.
the lighted end of the wand against the package to the left
of the barcode.
Using a steady sweeping motion, move the wand across
3.
the bar code from left to right and from right to left at a
medium to fast speed. Be sure to scan the entire barcode
and to keep the wand tip touching the package. A beep
tells you that the barcode was scanned successfully.
Scan the entire from barcode beginning outside
FIGURE 3.
the left edge
18