Beyond WBYBM2 Owner's Manual page 20

Breadmaker Owner's Manual
If the word Network was already on the display, the Bread-
maker is already networked. Press and hold the NETWORK
button for five seconds to unbind the Breadmaker, then
press the NETWORK button once to enter bind mode
again.
When the Home Hub detects the Breadmaker, it will prompt
6.
you to bind. You must press the Select button to bind the
Breadmaker.
When you have accepted the Breadmaker, the Breadmaker
will beep, the word "Network" will remain lit and the Bread-
maker clock will synchronize to the Home Hub. From then on,
the Breadmaker status will be viewable on your Home Hub
and the Breadmaker network features will be available. If you
turn off the Breadmaker or the Home Hub, you do not have to
rebind. The network connection will reestablish when the the
appliances are turned back on.
To Add your Breadmaker to your iCEBOX
Appliance Network
On your iCEBOX, open the My Kitchen Options Menu.
1.
On the My Kitchen Options Menu, select New Appliance.
2.
On the Breadmaker control panel, press the NETWORK
3.
button. The Breadmaker will enter Binding mode. The word
BIND will display and the word "Network" will blink on the
Breadmaker display.
If the Breadmaker double-beeps and the word Bind disap-
pears, there is a SANI Card problem.
If the word Network was already on the display, the Bread-
maker is already networked. Press and hold the NETWORK
14