Removing The Media Cover - Intermec 3600 Maintenance Manual

Removing the Media Cover

Most of the cleaning procedures require that you remove the media cover.
To remove the media cover
1. Place your fingers in the space at the lower center edge of the media cover
and pull the bottom of the cover away from the base of the printer.
2. Grasp the front of the media cover and lift the front of the cover upward.
2
I n t e I n t e
r m e r m e
c c
3 6
0 0
3. Lift the media cover away from the printer.
Preventive Maintenance
3
Media cover
release
(between the two
notches)
Media
cover
1
3600M.010
2
2-5