Intermec 3600 Maintenance Manual page 53

Format
This label, which can be a test of a single format or can provide a two-label
sample of all the formats, has bar codes and human-readable fields that you
can use to determine whether the printer you are testing is attaining the best
print quality possible using a particular format.
*
*
Pitch
This label is a gray scale printout of every third dot. The test label should
present a regular pattern with dots that line up diagonally when held at an
angle. Look for irregularities that may signal a problem with the platen roller
or the media path. If the printhead is uneven or the print path is skewed, it will
be reflected in this label. Use this label to determine whether the printhead is
printing evenly, but use the actual customer format to pass/fail the printhead.
c 3 9 frank Testing and Adjusting
CODE,39 0123456789
CODE 39 0123456789
0123456789
ON
CODE 39
3600 TEST LABEL
3600 TEST LABEL
3600 TEST LABEL
3600 TEST LABEL
3600 TEST LABEL
3600 TEST ON
CODE,93,TEST,PRINT,BARCODE
CODE,93,TEST,PRINT,BARCODE
DT / TTR PRINT QUALITY SAMPLE
ON
OFF
ON OFF
3600M.027
3
OFF
OFF
3600M.026
3-9