Intermec 3600 Maintenance Manual page 52

3600 Printer Maintenance Manual
c 3 9 frank c 3 9
Software Configuration
This three-label set lists current configuration parameters that are set from the
host computer. It also lists defined pages, formats, graphics, fonts, and
installed options. This label serves as a configuration reference as well as an
alphanumeric and multiple label alignment and print test.
Program Version :
Pages Defined :
Formats Defined :
Fonts Defined :
Graphics Defined : none
Print Quality
This label contains bar codes and human readable fields that you can use to
determine whether the printer you are testing is attaining the best print quality
possible. If you notice problems with the print quality, check and perform the
adjustment and alignment procedures provided in this chapter to achieve
optimum printer performance.
3-8
1.1
PRINT SPEED - 3.0 IPS
0 IMAGE BANDS - 3
0, 19
MAX LABEL LENGTH - 4 inches CUTTER - Disabled
0, 1, 2, 7, 20 21, 22, 23, 24,
LABEL STOCK - Inter- label gap DARK ADJUST - 0
25, 30, 31, 32, 33, 34, 35, 36,
37, 38, 39, 40, 41 MEDIA TYPE - Direct Thermal
MEDIA LENGTH - 0 inches
CHARACTER SET - US ASCII LABEL REST POINT - 0
TRANSLATION - Disabled
EMULATION - Disabled
LABEL RETRACT - Enabled
CODE,39,3.0./1
CODE,39,3.0./1
RIBBON SAVE - Disabled
SELF STRIP - Disabled
X FORMS ADUST - 0
Y FORMS ADJUST - 10
SENSITIVITY - 420
/1 3.0 39 CODE
ON
ON
3600M.025
BAUD RATE - 9600
DATA BITS - 7
MESSAGE LENGTH - 255
PARITY - Even
STOP BITS - 1
PROTOCOL - Xon/Xoff No Status
DEVICE ADDRESS - A
INTERNAL OPTIONS - none
EXTERNAL OPTIONS - Self Strip
OFF
OFF
ON
OFF
ON
OFF
3600M.024