Setups
Tip
If the default value for the Reduce/Enlarge feature is set to Auto%, then you cannot select the
Auto option as the default setting for Paper Supply (refer to is on page 9-95).
Note
For information about R/E Preset buttons, refer to Reduce/Enlarge Presets on page 9-117.
Original Type
Select the default setting for the Original Type feature on the Image Quality screen. Select
one of the following items as your default Original Type option.
The selection made here appears as the default setting on the Original Type screen (Image
Quality tab, Copy feature); refer to the below illustration:
Xerox 4112/4127 Copier/Printer
9-97
System Administration Guide