Note
If your network does not require a Proxy Server, you can go to Step 17. You will, however,
need to have DNS settings enabled (see TCP/IP Protocol Configuration in this guide).
12. Place a check mark in the Use Proxy Server box.
13. In the Addresses to Bypass Proxy Server box, enter in up to 1024 characters of IP addresses,
fully qualified host names, or wildcard host names (such as *.eng), separated by semicolons.
Functioning like the local address exception list in a typical web browser, these addresses
will be permitted to bypass the Proxy Server.
Xerox 4112/4127 Copier/Printer
System Administration Guide
Options
11-9