Copying
Reducing or Enlarging the Image
You can reduce the image to as little as 25% of its original size or enlarge it as much as 400%.
To reduce or enlarge the copied image:
At the printer control panel, press the Home button.
1.
2.
Touch Copy.
3.
Touch Reduce/Enlarge, then select an option.
−
To have the device automatically select the best ratio to reduce or enlarge the original image,
touch Auto %. When selected, the printer scales the original image based on the size settings of
the selected paper tray.
−
To set the copy size in increments of 1%, touch the + or - buttons to set the percentage. The
default setting is 100%.
4.
Touch OK.
Specifying the Original Document Type
To specify the type of the original document:
1.
At the printer control panel, press the Home button.
2.
Touch Copy.
Touch Original Type.
3.
4.
Select one of the following:
Auto: Use this option to allow the printer to determine the original document type.
−
−
Text: Use this setting for black and white or colored text.
−
Text & Photo
Printed: Use this setting for documents with text and photographs printed on paper.
•
•
Photocopied: Use this setting for photocopied documents that include text and
photographs.
•
Photograph: Use this setting for documents that include photographs and text on
photographic paper.
−
Photo
Photograph: Use this setting for original photographs on photographic paper.
•
Printed: Use this setting for photographs printed on magazine paper.
•
•
Photocopied: Use this setting for photocopied photographs.
Map: Use this setting to enhance faint backgrounds and fine details on maps.
−
5.
Touch OK.
Making the Image Lighter or Darker
1.
At the printer control panel, press the Home button.
2.
Touch Copy.
Touch Lighten/Darken.
3.
4.
To adjust the lightness, move the slider to the right to lighten or to the left to darken your print job.
124
Xerox
WorkCentre
®
User Guide
6515 Color Multifunction Printer
®