Xerox 4112 System Administration Manual page 168

Setups
1. From the Machine Clock/Timers screen, select Auto Clear and press Change Settings.
2. Select Off or On.
3. If you selected On, set the time by using the
numeric quantity.
4. Select Save to save the settings and return to the previous window.
Auto Job Release
If an error occurs during a copy or scan job, you can set the time that elapses until the current
job is automatically cleared, and thereby enabling the completion of the next job. Errors that
may occur include a paper feed, a jammed original, a copy jam, running out of hard disk space,
etc. Once the current job is cleared, jobs that can be continued are limited to those that only
use parts of the machine not affected by the error.
Set the value in the range 4 to 99 minutes, in 1 minute increments. Select Off if you do not
want to use this feature.
1. From the Machine Clock/Timers screen, select Auto Job Release, and select Change
Settings.
2. Select Off or On.
3. If you selected On, set the time by using the
numeric quantity.
4. Select Save to save the settings and return to the previous window.
9-10 System Administration Guide
Xerox 4112/4127 Copier/Printer
, , or the numeric keypad to enter a
, , or the numeric keypad to enter a