Time Zone - Xerox 4112 System Administration Manual

Setups
Power Saver/Energy Saver Timers
In power saving mode, there is a "low-power mode" and a "sleep mode," and when the set time
has elapsed, the following occurs:
Last operation on the machine
1. From the Machine Clock/Timers screen, select Power Saver/Energy Saver Timers, and
select Change Settings.
2. Set low-power mode and sleep mode.
• From Last Selection to Low Power Mode: Set the time to go from last operation to low-
power mode. Set the time from 1 to 240 minutes, in 1 minute increments.
Note
The time From Last Operation to Low-power Mode must not exceed the time From Last
Operation to Sleep Mode.
• From Last Selection to Sleep mode: Set the time to go from last operation to sleep
mode from 1 to 240 minutes, in 1 minute increments.Disabled.

Time Zone

Use the , to set the time difference from Greenwich Mean Time (GMT).
Select Save to save the settings and return to the previous window.
9-12 System Administration Guide
Xerox 4112/4127 Copier/Printer
Low-power mode Sleep mode