Xerox 4112 System Administration Manual page 305

4. Select Save.
5. Repeat Steps 1-4 for the remaining Other Settings items.
6. From the Other Settings screen, select Close to return to the Scan Mode Settings screen.
Memory Full Procedure
Select either Delete Job or Run Job as the default setting. This default setting appears while
scanning an original if there is insufficient hard disk space for the scanner. If an insufficient
amount of hard disk space is determined, a confirmation screen appears asking how the
partially stored data should be handled (cancel job or run job).
• Delete Job: The stored data is discarded.
• Run Job: The partially stored data is treated as valid and complete, the job is run.
If the user does not respond to the confirmation screen and a predetermined amount of time
elapses, the machine automatically processes the partially-stored data according to the default
setting selected here.
Note
You can set the time limit that occurs between the confirmation screen and the automatic
processing of the stored data. For more information, refer to Auto Job Release on page 9-10.
Maximum Stored Pages
Select the maximum number of stored pages of a scan original. Select between 1-999 pages.
Color Saturation (with optional Color Scanner kit only)
Select the amount of color saturation for scanned data. Select from Lower, Low, Normal, High,
or Higher.
Auto Exposure Level (with optional Color Scanner kit only)
Select the Auto Exposure Level for scanned data. Select from Normal, High (+1), Higher (+2),
Higher (+3), or Higher (+4).
Background Suppression Level (with optional Color Scanner kit only)
Select the amount of background suppression for scanned data. Select from Higher +1, HIgher
+2, Normal, Lower -1, or Lower -2.
Color Space (with optional Color Scanner kit only)
Select if color space is to be enabled for scanned data. Select either Disabled or Enabled.
TIFF Format
Select the TIFF format for scanned data. Select either TIFF V6 or TTN2.
Image Transfer Screen
Select whether or not to display a message when the scan process is completed.
• Disabled: Do not show a scan completion message.
Xerox 4112/4127 Copier/Printer
System Administration Guide
Setups
9-147