Exiting The Power Saver Mode; Interface Cables; Using The Ethernet Interface - Xerox 4112 System Administration Manual

Exiting the Power Saver Mode

The following describes how to exit the Power Saver mode. The Power Saver mode is exited in
the following instances:
• By pressing the Power Saver button
• Receiving Print Data
1. Press the Power Saver button.

Interface cables

When connecting to a network, use the Ethernet interface.

Using the Ethernet Interface

The Ethernet interface supports the following 2 types:
• 100Base-TX
• 10Base-T
This section describes the installation procedure for the Ethernet interface.
1. Confirm that the power switch is turned off.
2. Connect a network cable to the Ethernet interface connector.
Note
Prepare a network cable suitable for your network connection. When changing the network
cable, consult the appropriate personnel.
3. Switch on the machine.
Power Saver
button
Xerox 4112/4127 Copier/Printer
System Administration Guide
Product Overview
1-15