Changing The Power Saver Mode Time Interval - Xerox 4590 System Administration Manual

Changing the Power Saver Mode time interval

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e
To activate the Power Saver feature, set the Sleep Mode button to
Enabled, and set the Low Power Mode and the Sleep Mode time
intervals as follows:
NOTE: The amount of time that passes before the machine enters
Low Power Mode and Sleep Mode can be specified in 1
minute increments, from 1 to 240 minutes for each mode.
Press the Log In / Out button.
1.
Enter the System Administrator ID with the numeric keypad,
2.
and select Confirm
3. Select System Settings.
1. O v e r v ie w
Log In / Out
button
1-15