E-Mail; Enabling The Ports - Xerox 4590 System Administration Manual

3. U s i ng C e nt r eWa r e I nt er n e t S er v i c e s

E-mail

3- 2 2
Set the LDAP Server Address.
6.
Set the Port Number.
7.
Reflect the values as the machine's setting values.
8.
a. Click the Apply New Settings. A screen to enter the user
name and password will be displayed.
b. Enter the System Administrator UserID and password into
User Name and Password, and then click OK.
NOTE: The default User ID value is 11111 and password is
x-admin.
c. The right frame on the web browser will change to the
machine reboot display.
Click Reboot. The machine will reboot and the setting value
9.
will be reflected.

Enabling the ports

This section describes the procedure to enable the ports that are
used for the e-mail feature.
Start a web browser.
1.
Type the IP address or the Internet address for the machine in
2.
the address bar on the browser, and press the Enter key.
• Example of the IP address entry:
http://192.168.1.1/
• Example of the Internet address entry:
http://xxx.yyyy.zz.vvv/
NOTE: When specifying a port number, add ":" and a port
number to the end of the Internet address.
Click the Properties tab.
3.
Xe r o x 45 90 / 4110 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e