Xerox 4590 System Administration Manual page 186

8. S e tu ps
Control Panel Select Tone
Control Panel Alert Tone
Base Tone
Machine Ready Tone
Copy Job Complete Tone
Non-Copy Job Complete
8- 2 8
Select the desired setting for the specific Audio Tone feature.
4.
Select Save.
5.
Select the volume level that sounds when a button displayed on
the screen is correctly selected. Select from Loud, Normal, and
Soft. To disable the sound, select Off.
Select the volume level that sounds when a non-functioning (or
grayed-out) button is selected or when an error occurs. Select
from Loud, Normal, and Soft. To disable the sound, select Off.
For a button that toggles (the setting changes each time it is
pressed), select the volume level that sounds when the button is in
its initial (first) position. This is the sound made when the Interrupt
button is released. Select from Loud, Normal, and Soft. To
disable the sound, select Off.
Set the volume level that sounds when the machine is ready to
copy or print or after the machine powers on. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Select the volume level that sounds when the machine
successfully completes the copy cycle. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Select the volume level that sounds when the machine completes
a job other than a copy job. Select from Loud, Normal, and Soft.
Tone
To disable the sound, select Off.
Xe r o x 45 90 / 4110 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e