NetWare
X er o x 4 5 90 / 4110 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e
This section describes the settings for NetWare.
Start a web browser.
1.
Type the IP address or the Internet address for the machine in
2.
the address bar on the browser, and press the Enter key.
•
Example of the IP address entry:
http://192.168.1.1/
•
Example of the Internet address entry:
http://xxx.yyyy.zz.vvv/
NOTE: When specifying a port number, add ":" and a port
number to the end of the Internet address.
Click the Properties tab.
3.
Click + on the left of Protocol Settings to display the items in
4.
the folder.
Click NetWare.
5.
Set the Host Name.
6.
Select an operation mode from the Active Mode pull-down
7.
menu.
Set the Fileserver Name.
8.
NOTE: Set this item only when the operation mode is in
Bindery Service.
3 . Us i ng Ce nt r eWa r e I nt er n e t Se r v i c e s
3-11