Xerox 4590 System Administration Manual page 29

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e
Select Auto Power Saver, and select Change Settings.
7.
Using the up/down arrow buttons, configure a power saver
8.
mode migration time from 1 to 240 minutes, in 1 minute
increments.
• From Last Selection to Low Power Mode: Set the time
to move to the Low Power Mode after the last operation.
NOTE: The default for From Last Selection to Low
Power Mode is 15 minutes.
• From Last Selection to Sleep Mode: Set the time to
move to the Sleep Mode after the last operation.
NOTE: The default for From Last Selection to Sleep
Mode is 60 minutes. Configure the From Last Selection
to Sleep Mode time to be longer than the From Last
Selection to Low Power Mode time.
Press Save.
9.
Select Close repeatedly until the System Setting/System
10.
Settings screen is displayed.
Select Exit to exit the System Administration mode.
11.
1. O v e r v ie w
1-17