Configuration Procedure; Overview; Enabling The Ports And Setting The Ip Addresses; Configuring The E-Mail Environment - Xerox 4590 System Administration Manual

Register a Mail Account
Configuring the E-mail
Environment

Configuration procedure

Overview

Enabling the ports and setting the IP addresses

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e
In order to use e-mail on the machine, a mail account for the
machine needs to be registered.
Enable the port and configure the machine e-mail address,
TCP/IP environment, and e-mail server from the machine.
NOTE: The configuration can also be performed using
CentreWare Internet Services.
This section describes the configuration procedure to use the e-
mail feature on the machine.
The following two steps are necessary to use the e-mail feature:
• Enabling the port and setting TCP/IP: Set the machine to be
able to use TCP/IP
• Configuring the e-mail feature: Set the e-mail function items
on the machine.
This section describes the configuration procedure to use TCP/IP
on the machine.
First enable the e-mail port, then set the IP address.
NOTE 1: The configuration can also be performed using
CentreWare Internet Services.
NOTE 2: Enable the SOAP port and the SNMP port in most cases.
Refer to "Using CentreWare Internet Services" on page 3-1.
Display the System Administrator Menu screen.
1.
a. Press the Log In/Out button.
b. Enter the UserID using the numeric keypad and select
Confirm.
NOTE: The default User ID value is 11111. When using the
Authentication feature, a password is required. The default
password is x-admin.
c. Select System Settings.
4 . E - ma i l
4-3