Changing The Default Time Settings For Low Power And Power Save (Auto Off/Sleep) Modes - Xerox Document Centre 420 User Manual

Changing the Default Time Settings for Low Power and Power
Save (Auto Off/Sleep) Modes
À
Select [Access]
the control panel.
À
Enter the password using the
keypad and select [Enter].
NOTE: User access to Setups
is password protected. Please
contact the Key Operator or
refer to "Setups" on page 10-1
for assistance.
Xerox Document Centre 440/432/420 User Guide
The factory default setting of 60 minutes is customer
changeable within the range of 5 to 240 minutes, depending on
work pattern. For more information refer to "Changing the
Default Time Settings for Low Power and Power Save (Auto
Off/Sleep) Modes" on page 2-11 .
on
Page 2-11