Powering Off - Xerox 4590 System Administration Manual

Powering off

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e
The procedure for turning the power off is as follows:
KEY POINT: Switching the machine power off may cause loss of
data being processed.
Before turning the power off, make sure that all copy or print
1.
jobs have completely finished. Also, make sure that the
Online indicator is not lit.
KEY POINT: Never turn the power off in the following
instances:
– While data is being received
– While data is being sent (FTP/SMB/e-mail)
– While jobs are being printed.
– While jobs are being copied
– While a scan is being executed
– While data is being imported from computer
Press the power switch to the [
2.
KEY POINT: Power off processing is performed internally on
the machine for a while after the power switch is turned off.
Therefore, do not unplug the power cord from the power outlet
immediately after turning the power switch off.
NOTE: Before you turn the power back on after turning it off, first
make sure that the display has gone out.
1. O v e r v ie w
] side.
1-13