Xerox 4590 System Administration Manual page 73

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e
Set the e-mail address for the machine and administrator.
3.
a. Click Machine Details.
b. Set the Administrator E-Mail Address.
c. Set the Machine E-Mail Address.
Click + on the left of Protocol Settings to display the items in
4.
the folder.
Click TCP/IP.
5.
Set the Host Name.
6.
Set the DNS information.
7.
NOTE: The DNS settings are required when the addresses for
a POP3 server and a SMTP server are set with the domain
name rather than their IP addresses.
a. Select the DHCP check box if using DHCP for the Get
DNS Address.
b. Set the DNS Server Address 1 to 3.
NOTE: This item is not necessary if DHCP has been
specified for the Method to Get the DNS Server
Address.
c. Set the DNS Name.
d. Select the On check box when using the Generate
Domain Search List Automatically.
e. Set the Domain Name 1 to 3.
f. Set the Connection Time-Out.
g. Select the On check box to enable the Dynamic DNS
Update.
Click E-Mail.
8.
Set the receive protocol using the Receiving Protocol pull-
9.
down menu.
NOTE: Set this item when using the mail print feature.
Set the print method using the Incoming E-mail Print
10.
Options pull-down menu.
NOTE: Set this item when using the mail print feature.
3 . Us i ng Ce nt r eWa r e I nt er n e t Se r v i c e s
3-25