Scan-To-Ftp/Smb Defaults - Xerox 4590 System Administration Manual

Scan-to-FTP/SMB Defaults

X er o x 4 5 90 / 4110 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e
You can select the default protocol that is used for file transfer
from FTP, SMB, and SMB (UNC format).
1. From the Scan Mode Settings screen, select Scan-to-
FTP/SMB Defaults.
Select Change Settings.
2.
Select the item to be changed.
3.
Select Save; you are returned to the Scan-to-FTP/SMB
4.
Defaults screen.
Select Close to return to the Scan Mode Settings screen.
5.
8 . S e t ups
8-135