Paper Supply - Xerox CopyCentre C123 User Manual

NOTE: This feature is not available in the double-sided mode. When using this feature
to scan long documents which exceed 432 mm (17.0 inches), the operator must feed
the document one sheet at a time. The paper weight should be between 60 and 90 g/
2
m .
Document Weight: 38 to 128 g/m
Mixed Sizes: Yes – if so specified on the machine and the lead edges of documents
have the same dimension.
Auto Size Sensing: Yes
NOTE: The standard sizes of documents that can be detected vary depending on the
paper size table specified by the Key Operator. For information on setting the paper
size table, refer to Paper Size Settings in the Setups chapter on page 198.

Paper Supply

NOTE: The standard sizes of documents that can be detected vary depending on the
paper size table specified by the Key Operator. For information on setting the paper
size table, refer to Paper Size Settings in the Setups chapter on page 198.
Trays 1, 2 & 3, 4 (Two Tray Module)
Capacity: 500 sheets of 80 g/m
Paper Weights: 60 to 105 g/m
Paper Sizes: For width: 140 to 297 mm (5.5 to 11.7") / for length: 182 to 432 mm (7.2
to 17.0").
Auto Size Sensing: Yes
Tray 5 (Bypass)
Capacity: Approximately 95 sheets of 80 g/m
*: Using standard paper 4200 3R2047.
NOTE: The paper stack height must not exceed 10 mm (0.4 inches).
Paper Weight: 60 to 216** g/m
Paper Sizes: For width: 89 to 297 mm (3.5 to 11.7") / for length: 99 to 432 mm (3.9 to
17.0").
Auto Size Sensing: Yes
Tray 3, 4 (Tandem Tray Module)
Capacity: Tray 3 (Left-hand tray): 800 sheets
Paper Weight: 80 g/m
Paper Sizes: B5 LEF/A4 LEF/7.25 × 10.5" LEF/8.5 × 11" LEF
Paper Weight: 60 to 216** g/m
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide
2
2
for Tray 1 and 60 to 216** g/m
2
Tray 4 (Right-hand tray): 1,200 sheets
2
(20 lb bond) paper
2
2 2
(50 to 128 g/m in double-sided mode)
(20 lb bond) paper per tray
2
paper (100* sheets of 20 lb bond paper)
Paper Supply
2
for Trays 2, 3, and 4
339