Xerox CopyCentre C123 User Manual page 326

16 Problem Solving
Code
003-981
005-275
005-280
005-283
005-284
005-285
005-286
012-211
012-212
012-221
012-223
012-224
012-260
012-263
012-282
012-283
012-284
012-285
012-291
012-293
012-294
012-295
012-296
016-210
016-211
016-212
016-213
016-214
016-215
016-450
016-454
016-503
016-504
016-505
326
Stapling mixed size documents is available only for documents with the same
width. Cancel the staple feature or reset the documents with the same width.
An error occurred in the document feeder. Contact the Xerox Welcome Center.
An error occurred in the finisher. Contact the Xerox Welcome Center.
An error occurred on the software option settings. Contact the Xerox Welcome
Center.
The SMB host name has been set twice. Change the host name.
Could not acquire the IP address from DNS. Check the DNS settings and IP
address acquisition method setting.
Could not determine the name of the SMTP server when e-mail was
transmitted. Check if the SMTP server is set correctly. Also, check that the DNS
server is set correctly.
Could not determine the name of the POP3 server when e-mail was transmitted.
Check if the POP3 server is set correctly. Also, check that the DNS server is set
correctly.
Could not log in to the POP3 server when transmitting e-mail. Check if the user
name and password used for the POP3 server are set correctly.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide
Description and Remedy