Screen Defaults - Xerox CopyCentre C123 User Manual

11 Setups
Low Toner Alert Tone
Select the volume level of the tone generated when it is time to replace the toner
cartridge.
Line Monitor Volume
Select the volume level of the tone generated for the line monitor, which allows you to
hear call and response signals when connecting to a destination.
Ringing Volume
Select the volume level of the tone generated when a call is received.
Stored Programming Tone
Select the volume level of the tone generated each time operation is performed during
job memory registration. You cannot completely turn off the volume for this tone.
Auto Clear Alert Tone
Select the volume level of the tone generated just before the machine performs auto
clear.
Base Tone
Select the volume level of the base tone generated when you toggle settings. The
machine emits a base tone when it exits the interrupted mode.

Screen Defaults

This feature allows you to customize the initial screen and select the initial language to
be displayed on the touch screen.
1.
Select [Screen Defaults] on the
[Common Settings] screen.
2.
Perform the necessary
operations.
3.
Select [Close].
Screen Default at Power On
Specify the initial screen to be displayed when the machine is switched on. You can
change the preset initial screen to the Features, Job Status, or the Machine Status
screen. For information on these screens, refer to the Job Status chapter and the
Machine Status chapter.
All Services
Select the buttons for the services and features displayed on the initial screen when the
<All Services> button is pressed.
192 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide