Xerox CopyCentre C123 User Manual page 249

F Code
Relay Broadcast
Billing - Day Time
Billing - Night Time
Billing - Midnight
With [Internet Fax] selected:
E-mail Address
Recipient Name
Index
Communication Mode
Resolution
Maximum Image Size
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide
Item
Specify whether or not to perform F Code
transmission. If you select [On], then
enter the appropriate F Code and
password.
Specify whether or not to use the machine
as an initiating relay broadcast station in
order to use the registered Address
Number as a relay station. If you select
[On], enter a Relay Station ID, Broadcast
recipients, and Print at Relay Station.
Specify whether to enable billing of user
accounts for fax jobs during daytime.
Specify whether to enable billing of user
accounts for fax jobs during nighttime.
Specify whether to enable billing of user
accounts for fax jobs during midnight.
Item
Enter an e-mail address (up to 128
characters).
Enter a recipient name (up to 18
characters).
Enter a single alphanumeric character to
use as a keyword for searching the
Address Book.
Select a communication mode from either
[G3 Auto], [F4800], or [G4 Auto].
Select a resolution level to be used for
transmission, from among [Panel],
[Standard], [Fine], [Superfine (400dpi)],
and [Superfine (600dpi)]. With [Panel]
selected, the resolution level selected on
the control panel is used.
Select the maximum image size,
depending on recipients' paper size, from
among [A3], [B4], and [A4].
Description
Description
Setup Menu
Default
Off
Off
No Billing
No Billing
No Billing
Default
–
–
–
G3 Auto
Panel
A3
249