Xerox CopyCentre C123 User Manual page 332

16 Problem Solving
Code
034-790
034-791
034-792
034-793
034-794
034-795
035-702
036-507
035-704
035-744
035-745
035-705
035-708
035-709
035-710
035-712
035-720
035-746
035-749
041-210
041-211
047-211
047-212
047-213
047-214
047-215
332
Is the telephone line correctly connected to the machine? Check that the phone
line is connected correctly and send the document again. These codes are
displayed only in certain countries.
The other party cancelled the transmission. Ask the other party to check their
machine status and resend the document if necessary.
The specified feature (such as F Code) is not supported by the remote machine.
Contact the other party, and resend the document without using the feature if
required.
The remote machine may have encountered a problem. Contact the other party
and resend the document if necessary.
The remote machine cannot receive your document. Ask the other party to
check that their machine:
• Has paper in the tray
• Has no paper jam
• Has enough memory
• Supports G3 reception.
When specifying features such as relay broadcasting or a remote mailbox, ask
the other party if their machine supports these features, and if the password is
correct.
The fax network does not respond. Check the following and send the document
again.
• Is the telephone line correctly connected to the machine?
• The other party may not be connected to the fax network, or there may be
some problem with the network.
When you are connected to the fax network, enter two pauses after "161" and
"162", and then dial the telephone number.
The other party's telephone number was redialed the set number of times but
the remote machine did not answer. Ask the other party to check the telephone
line and connection to the machine.
An error occurred in the paper tray or Tandem Tray Module. Contact the Xerox
Welcome Center.
An error occurred in the paper output assembly. Contact the Xerox Welcome
Center.
An error occurred in the finisher. Contact the Xerox Welcome Center.
An error occurred in the Duplex Module. Contact the Xerox Welcome Center.
An error occurred in the paper output assembly. Contact the Xerox Welcome
Center.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide
Description and Remedy