Supported Paper Types - Xerox CopyCentre C123 User Manual
Hide thumbs
Also See for CopyCentre C123:
- Quick reference manual (154 pages) ,
- Scan manual (28 pages) ,
- Service manual (22 pages)
Table of Contents
Advertisement
10 Paper and Other Media
Supported Paper Types
The following table lists the paper types supported for each paper tray, duplex module,
and the finisher.
Paper Type
Plain
Recycled
Side 2 Paper
Transparency
Labels
Lightweight
Heavyweight 1
Heavyweight 2
O: Available
X: Not available
• Plain: When using Arjo Wiggins Conqueror High Speed Laser Laid CON90F
(64010283), select [Heavyweight1] on the [Paper Type] screen.
• Side 2 Paper: Refers to the paper already printed on one side (i.e. scrap paper).
• Transparency: When using Xerox paper backed (3R3028) (for US) or 3M Type L
Desktop Laser (3R91334) (for EU) in low temperature and humidity (10
select [Heavyweight1] on the [Paper Type] screen.
• If you select [Label], [Heavyweight 1] or [Heavyweight 2], load the paper LEF. If
loading the paper SEF, printed quality may be negatively affected.
• Lightweight: If you select [Lightweight], the machine lowers the temperature of the
fuser unit when printing. Select this option when paper curls or other pritning
problems occur due to high temperature in the fuser unit when it sets toner on the
paper.
• Heavyweight: Depending on heavyweight paper, the machine cannot load Short
Edge Feed. In that case set the paper Long Edge Feed.
• Depending on the type of paper used and the operating environment, paper may not
feed to the machine properly, or print quality may be negatively affected.
186
2
Tray 1
Weight (g/m
)
O
60–105
O
O
–
O
60–105
O
–
O
106–169
X
170–216
X
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide
Tray 2, 3–4
Tray 5
(Two Tray
(Bypass)
Module/TTM)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Duplex
Finisher
Module
O
O
O
O
X
O
X
X
X
X
X
X
X
X
X
X
o
C, 15%)
Hide quick links:
Advertisement
Table of Contents
