Original Orientation; Output Format - Copy - Xerox CopyCentre C123 User Manual

3 Copy

Original Orientation

This feature allows you to specify the orientation of the documents. The document
orientation must be specified before using the following features: Independent X-Y %,
2 Sided, Mixed Size Originals, Border Erase, Margin Shift, Multiple-Up, Repeat Image.
1.
Select [Original Orientation] on
the [Scan Options] screen.
2.
Select the required option.
3.
Select [Save].
Head to Top
Select this option when the top of the document is orientated towards the back of the
machine.
Head to Left
Select this option when the top of the document is orientated towards the left of the
machine.

Output Format - Copy

This section describes features that enhance the appearance of a copy job. For more
information on the features available, refer to the following.
Booklet Creation – page 65
Covers – page 67
Transparency Separators – page 68
Multiple-Up – page 69
Poster – page 69
Repeat Image – page 70
Annotation – page 71
Set Numbering – page 72
1.
Press the <All Services> button
on the control panel.
2.
Select [Copy] on the touch
screen.
3.
Select the [Output Format] tab.
Use the side tabs to switch
between screens.
64 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide