Network Settings
This screen allows you to change the default settings for the network configuration.
There are eight main setup options available. For more information, refer to the
following.
NOTE: Items shown in these setting screens may vary depending on a usage
environment.
For more information on network setups, refer to the System Administration Guide.
Port Settings – page 209
Protocol Settings – page 212
Machine E-mail Address/Host Name – page 213
POP3 Server Settings – page 214
SMTP Server Settings – page 215
Domain Filter – page 216
Remote Authentication Server Settings – page 216
Other Settings – page 217
1.
Select [Network Settings] on the
[System Settings] screen.
2.
Select the required option.
3.
Select [Close].
Port Settings
This feature allows you to set print mode, port status, communication mode, auto eject
time for each communication port.
1.
Select [Port Settings] on the
[Network Settings] screen.
2.
Perform the necessary
operations.
3.
Select [Close].
Parallel
Use this feature to specify whether to enable the parallel port and to configure the
relative parameter settings.
Port Status
Specify whether to enable the parallel port.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide
Network Settings
209