Omron SYSDRIVE 3G3FV User Manual page 302

Parameter Lists
Para Para Name
meter meter
Display
No. No.
name
C1-11 Sets the frequency for automat-
Accelera-
tion/decel- ic acceleration/deceleration
eration switching.
Below set frequency: Accel/de-
switching
cel time 4, above set frequency:
frequency
Accel/decel time 1
Note: The multi function input Note: The multi-function input
Acc/Dec
SW Freq
Note The setting range for acceleration/deceleration times will differ according to the setting for C1-10
(the unit for acceleration/deceleration time.) When C1-10 is set to 0, the setting range for accel-
eration/deceleration times becomes 0.00 to 600.00 seconds.
H S-curve Acceleration/Deceleration: C2
Name
Para
meter meter
Display
No.
name
All sections of the S-curve
C2-01 S-curve
characteristic time are set in
characteris-
seconds units.
tic time at
accelera-
Note: When the S-curve char-
tion start.
SCrv Acc
@ Start
C2-02 S-curve
characteris-
tic time at
accelera- Output frequency
tion end.
SCrv Acc
@ End
C2-03 S-curve
characteris-
tic time at
decelera-
tion start.
SCrv Dec
@ Start
C2-04
S-curve
characteris-
tic time at
decelera-
tion end.
SCrv Dec
@ End
7-14
Description Description
0.0 to
400.0
"multi-accel/decel time 1"
or "multi-accel/decel time
2" take priority.
Description
0.00 to
2.50
acteristic time is set, the acteristic time is set the
accel/decel times will in-
crease by only half of crease by only half of
the S-curve characteris-
0.00 to
tic times at start and
2.50
end.
0.00 to
2.50
Time
0.00 to
2.50
Setting Setting Default Default Chan- Chan-
range range setting setting ges ges
during during
opera- opera-
tion tion
0.0 NO
Setting Default Chan-
range range setting setting ges ges
during
opera-
tion
0.20 NO
0.20 NO
0.20 NO
0.00 NO
Chapter 7
Control mode
V/f V/f Open
control with loop
PG vector
A A A
Control mode
V/f V/f Open
control with loop
PG vector
A A A
A A A
A A A
A A A
Page Page
Flux
vector
A 5-13
Page
Flux
vector
A 6-58
A 6-58
A 6-58
A 6-58