Omron SYSDRIVE 3G3FV User Manual page 246

Advanced Operation
Parameter Display name p y
number
F2-01 AI-14 Input Sel
This parameter cannot be changed during operation.
Explanation of Settings
Setting
0 3-channel individual input (CH1: terminal 13; CH2: terminal 14; CH3: terminal 16;
1 3-channel additional input (Sum of CH1 to CH3 is used as the frequency reference value.)
Parameter b1-01 (reference selection) must be set to "1" (external terminal), except for when 3-channel
input (setting: 0) is set.
When using a 3G3IV-PAI14B, the multi-function input "Option/Inverter selection" function (setting: 2)
cannot be used.
H Setting a Digital Reference Card (F3)
When using a 3G3IV-PDI08/PD116H2 Digital Reference Card, set parameter b1-01 (reference selec-
tion) to "3" (option) and set the input method with parameter F3-01.
Parameter Display name p y
number
F3-01 DI Input
This parameter cannot be changed during operation.
Explanation of Settings
Setting
0 BCD 1% unit
1 BCD 0.1% unit
2 BCD 0.01% unit
3 BCD 1 Hz unit
4 BCD 0.1 Hz unit
5 BCD 0.01 Hz unit
6 BCD special setting (5-digit input)
7 Binary input (Set value is displayed in decimal notation.)
When binary input is used (setting: 7), this becomes the maximum frequency (100% speed) reference
when all bits are set to "1."
3G3IV-PD108:
3G3IV-PD116H2:
lected. Maximum frequency reference when 7530H (30000) is set with 16 bits selected.
Setting 6, BCD special setting (5-digit input), is valid only when the 3G3IV-PD116H2 is used.
If the parameter o1-03 (Display Scaling) is set to 2 or a larger value, normal BCD setting will be valid and
the setting unit in the parameter o1-03 will be valid.
Setting: Sign 8 x 10
1 to 5
4
Setting: 6 2 x 10 1 x 10
6-72
Setting g Units
range
0, 1 ---
Setting g Units
range
0 to 7 ---
Maximum frequency reference when FFH (255) is set.
Maximum frequency reference when FFFH (4095) is set with 12 bits se-
3 3 3
4 x 10 2 x 10
4 3 3
8 x 10 4 x 10
Default
setting
V/f V/f with
Control
0 Basic or Advanced
Description
Default
setting
V/f V/f with
Control
0 Basic or Advanced
Description
(Only when 3G3FV-PDI16H2 is used.)
3
1 x 10 to ... 8 x 10
3
2 x 10 to ... 1 x 10
Chapter 6
Valid access levels
Open Loop
PG Vector
Valid access levels
Open Loop
PG Vector
0 0 0
4 x 10 2 x 10
1 0 0
8 x 10 4 x 10
Flux
Vector
Flux
Vector
0
1 x 10
0
2 x 10