Ip Configuration; Change User Name And Password; Port / Trunk Configuration - Waters Network Systems PSX1008-GTX Operating Manual

4.28

IP Configuration

The IP Configuration menu allows you to assign an appropriate IP address.
1. Select Edit to configure all items.
2. When you have completed the configuration, press the Esc key to return to the menu
line.
3. Select Save to save the new settings.
Note: Always restart the switch once you have modified the configuration.
4.29

Change User Name and Password

You can change the User Name and Password from the Device Configuration menu.
The old password is required in order to make the change to the new password.
4.30

Port / Trunk Configuration

You can use this menu to change the port status and configure trunk groups. Use the
TAB key to change configure of these settings:
Enabled – You can disable or enable the port control.
Auto Negotiate – You can enable or disable auto negotiation per port.
Speed/Duplex Config – Ports 1-8 can be set to 100Mbps or 10Mbps speed. Port 9
Waters Network Systems User's Manual
PSX/MS1008 Models with Gigabit Uplink
Page 22