Disassembly Procedures
!
8. Remove Pressure Switch Hose and wiring connector
from Pressure Switch.
9. Lift Pressure Switch locking tab and rotate switch to
remove.
10.Remove Facia from Console.
Drain Pump/Belt Removal
1. Disconnect power supply to unit.
2. Remove back Cover.
3. Remove Drain Hose Clamps.
NOTE: There will be water remaining in the hose from
the last cycle.
©2005 Maytag Services
All manuals and user guides at all-guides.com
WARNING
To avoid risk of electrical shock, personal injury or death,
disconnect power to unit before servicing.
NOTE: There will be water remaining in the hose from
the last cycle.
4. Remove Belt.
5. Remove three screws retaining Drain Pump.
16026502
19