Download Print this page

Maytag AAV4000AW Series Service Manual page 54

Top load washer
Hide thumbs

Advertisement

Table of Contents
Using the Controls –
STEP
5
Fabric Selection
Select the appropriate fabric cycle for the type of load
by turning the cycle selector dial until the indicator
light by the desired fabric selection is illuminated.
WASH/SPIN
SPEED
Quick Wash
For lightly soiled or wrinkled
Gentle/Fast
garments needed quickly.
Ultra Hand Wash Provides intermittent agitation and
Ex. Gentle/Slow soak. For wool, silk, and other
hand-wash-only fabrics.
Hand wash
For sheer fabrics, bras and lingerie
Gentle/Slow
needing slower spin speed because
of clothing construction.
No Iron
For "wash and wear" and synthetic
Medium/Slow
fabrics and lightly to normally soiled
garments needing a slower spin
speed to reduce wrinkling.
Regular
For most sturdy fabrics including
Medium/Fast
cottons, linens and normally soiled
garments needing maximum water
extraction.
Whites & Towels For sturdy fabrics and heavily soiled
Normal/Fast
whites needing maximum water
extraction.
Soak Only
Provides approximately 33 minutes of alternating
periods of soaking with brief agitation at slow speed.
At the end of the cycle, the Cycle Selector dial must be
manually set to a wash cycle or spin cycle to drain the
washer. Avoid extended soaking.
Spin Only
Provides a spin to remove more water from the load.
Rinse and Spin
Use for loads that need rinsing only or to add rinse-
added fabric softener to a load.
Power Off
To cancel the cycle and turn off the washer, turn the
Cycle Selector dial to Power Off and push the dial in.
11
B–14
All manuals and user guides at all-guides.com
FABRIC SELECTION
16026502
Electronic Control Models
STEP
6
Start the Washer
To start the washer, press the cycle selector dial.
Changing a Cycle
If an incorrect cycle has been accidentally
selected:
1. Press the cycle selector dial.
2. Turn the cycle selector dial to the desired cycle.
3. Set the desired options for the cycle.
4. Press the cycle selector dial. The Wash indicator
lights stop flashing and the new cycle starts.
Canceling a Cycle
To cancel a cycle:
1. Press the cycle selector dial.
2. Turn the cycle selector dial to Power Off and push
the dial in.
To drain the washer:
1. Select the Rinse & Spin or Spin Only cycle.
2. Press the cycle selector dial. The Spin light
illuminates and the washer starts the rinse or spin.
©2005 Maytag Services

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Maytag AAV4000AW Series