9. Remove four screws retaining Spinner (Inner Tub).
10.After Spinner (Inner Tub) is removed, use Spanner
Wrench and Seal Nut tool to remove Seal Nut.
11. Remove gasket from Hub.
12.Use Spanner Wrench to remove Hub.
All manuals and user guides at all-guides.com
To avoid risk of electrical shock, personal injury or death,
disconnect power to unit before servicing.
13. Remove Pressure Switch Hose from fitting on Outer
14.Remove Suspension Springs using the spring
removal tool. Be careful not to let Tub and
Transmission assembly tip over.
©2005 Maytag Services