Removing The Drain Pump Assembly - Maytag MFW 9700S Technical Education

REMOVING THE DRAIN PUMP ASSEMBLY

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the three T-20 hex-head torx
screws from the toe panel and remove the
panel.
Screws
Drain Pump Assembly
Toe Panel
4-17
4. Raise the drain pump wiring cover and
disconnect the wire connector.
Wiring Cover
Pump Wire Connector
5. Loosen the clamps, and disconnect the
drain and tub hoses from the drain pump.
6. Slide the drain pump forward in its mount-
ing slots and lift it out of the washer.
Tub Hose
Drain Hose