Maytag AAV4000AW Series Service Manual page 10

Troubleshooting Procedures
Due to possibility of personal injury or property damage, always contact an authorized technician for servicing or
repair of this unit.
All safety information must be followed as provided in the Service Manual.
To avoid risk of electrical shock, personal injury or death, disconnect power to unit before servicing.
ENTER SERVICE MODE
10
All manuals and user guides at all-guides.com
!
CAUTION
!
WARNING
Rotate the Cycle Selector Knob to the "Power Off"
position and press knob.
(All LED's will be off).
Rotate the Cycle Selector Knob clockwise past
"Power Off" twice and stop at "Regular".
(LED's will illuminate as the knob is rotated).
Rotate the Cycle Selector Knob counterclockwise
one revolution back to "Regular" and press knob.
•
Power Off, Rinse & Spin LED will blink (if error
codes are present). Regular LED will be
illuminated.
•
Model I.D. is displayed by the LED's around the
bottom of the dial.
•
Model I.D. can be redisplayed while in Service
Mode by setting knob to "Handwash" and
pressing.
•
Refer to chart for Model I.D.
16026502
©2005 Maytag Services