Correcting Tripmeter A; Resetting Measurement Data; Resetting Tripmeter A; Resetting Tripmeter A (Trip A) And Timer - Yamaha WR450F(V) Owner's Service Manual

MULTI-FUNCTION DISPLAY

Resetting measurement data

NOTE:
Resetting can be made in the following two
manners.
Resetting is possible while timer measurement
is made:
• Reset tripmeter A.
Resetting is possible while timer measurement
is not made:
• Reset tripmeter A and timer.
Resetting tripmeter A (TRIP A)
1. Check that the timer is in operation. If the
timer is not in operation, start the timer by
pushing the "SLCT1" button and "SLCT2"
button at the same time.
2. Reset tripmeter A (TRIP A) display by
pushing the "RST" button for 2 seconds or
more.
NOTE:
If reset,
on flashing for four seconds.

Resetting tripmeter A (TRIP A) and timer

1. Check that the timer is not in operation. If
the timer is in operation, stop it by pushing
the "SLCT1" button and "SLCT2" button at
the same time.
2. Reset all measured data by pushing the
"RST" button for 2 seconds or more.
NOTE:
• Resetting will reset the timer display and
travel distance display and put measurement
on standby.
• Auto start attempt will put measurement on
standby as such. Likewise, manual start
attempt will put measurement on standby as
such.
Correcting tripmeter A (TRIP A)
1. Change the travel distance display by
pushing the "SLCT1" button (plus) or
"SLCT2" button (minus). A long push on
the button will fast-forward the change.
NOTE:
Change can be made any time while timer
measurement is or is not being made.
1 - 19
GEN
INFO
and travel distance display will go