Yamaha WR450F(V) Owner's Service Manual page 600

FRONT FORK
26. Install:
• Cap bolt 1
To outer tube.
NOTE:
Temporarily tighten the cap bolt.
27. Install:
• Protector guide 1
NOTE:
Install the protector guide with its wider side a
facing downward.
Installation
1. Install:
• Front fork 1
NOTE:
• Temporarily tighten the pinch bolts (under
bracket).
• Do not tighten the pinch bolts (handle crown)
yet.
2. Tighten:
• Cap bolt 1
3. Adjust:
• Front fork top end a
Front fork top end (standard) a:
Zero mm (zero in)
4. Tighten:
• Pinch bolt (handle crown) 1
• Pinch bolt (under bracket) 2
CAUTION:
Tighten the under bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
5 - 37
CHAS
30 Nm (3.0 m · kg, 22 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
20 Nm (2.0 m · kg, 14 ft · lb)