Basic Mode; Changing Speedometer Display (For U.k.); Setting The Time - Yamaha WR450F(V) Owner's Service Manual

MULTI-FUNCTION DISPLAY

BASIC MODE

Changing speedometer display (for U.K.)

1. Push the "SLCT2" button for 2 seconds or
more to change the speedometer units.
The speedometer display will change in the
following order:
MPH → km/h → MPH.

Setting the time

1. Push the "SLCT1" button for 2 seconds or
more to enter the time setting mode.
2. Push the "RST" button to change the dis-
play for time indication. The display will
change in the following order:
Hour → Minute → Second → Hour.
NOTE:
The digits capable of setting go on flashing.
3. Push the "SLCT1" button (plus) or "SLCT2"
button (minus) and change the time. A long
push on the button will fast-forward the
time.
4. To end the setting, push the "RST" button
for 2 seconds or more.
NOTE:
• In a 30-second absence of button operation,
the setting will come to an end with the indi-
cated time.
• To reset the seconds, push the "SLCT1" but-
ton or "SLCT2" button.
1 - 15
GEN
INFO