Yamaha WR450F(V) Owner's Service Manual page 602

2
1
2
3
1
b
3
a
4
2
1
4
FRONT FORK
5. Install:
• Speed sensor lead 1
• Plate 1 2
• Bolt (plate 1) 3
To protector (right) 4.
NOTE:
Install the speed sensor lead so that its paint
a directs as shown and align the bottom b of
the plate 1 with the same paint.
6. Install:
• Speed sensor lead 1
• Plate 2 2
• Screw (plate 2) 3
To protector (right) 4.
NOTE:
Install the plate 2 in the direction as shown.
7. Install:
• Protector 1
• Bolt (protector) 2
8. Adjust:
• Rebound damping force
NOTE:
Turn in the damping adjuster 1 finger-tight
and then turn out to the originally set position.
5 - 38
CHAS
4 Nm (0.4 m · kg, 2.9 ft · lb)
0.5 Nm (0.05 m · kg, 0.36 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)