Yamaha WR450F(V) Owner's Service Manual page 662

REAR SHOCK ABSORBER
2. Install:
• Bush 1
• Collar 2
• Dust seal 3
NOTE:
• Apply the molybdenum disulfide grease on
the bearing and dust seal lips.
• Install the dust seals with their lips facing out-
ward.
3. Install:
• Rear shock absorber
4. Install:
• Bolt (rear shock absorber-frame) 1
• Nut (rear shock absorber-frame) 2
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5. Install:
• Bolt (rear shock absorber-relay arm) 1
• Nut (rear shock absorber-relay arm) 2
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
6. Install:
• Rear frame 1
• Bolt [rear frame (upper)] 2
• Bolt [rear frame (lower)] 3
7. Tighten:
• Screw (air filter joint) 1
5 - 68
CHAS
56 Nm (5.6 m · kg, 40 ft · lb)
53 Nm (5.3 m · kg, 38 ft · lb)
32 Nm (3.2 m · kg, 23 ft · lb)
29 Nm (2.9 m · kg, 21 ft · lb)
3 Nm (0.3 m · kg, 2.2 ft · lb)