Fuel Meter; Odometer/Tripmeter Modes; Clock - Yamaha FZ1-S Owner's Manual

Clock

1. Clock
The clock displays when the key is
turned to "ON". In addition, the clock
can be displayed for 10 seconds by
pushing the "SELECT" button when the
main switch is in the "OFF", "LOCK"
or " " position.
To set the clock
1. Turn the key to "ON".
2. Push the "SELECT" button and
"RESET" button together for at
least two seconds.
3. When the hour digits start flashing,
push the "RESET" button to set the
hours.
4. Push the "SELECT" button, and
the minute digits will start flashing.
INSTRUMENT AND CONTROL FUNCTIONS
5. Push the "RESET" button to set
the minutes.
6. Push the "SELECT" button and
then release it to start the clock.
Odometer and tripmeter modes
1. Odometer/tripmeter/fuel reserve tripmeter
Push the "SELECT" button to switch
the display between the odometer
mode "ODO" and the tripmeter modes
"TRIP A" and "TRIP B" in the following
order:
TRIP A → TRIP B → ODO → TRIP A
When the fuel amount in the fuel tank
decreases to 3.4 L (0.90 US gal,
0.75 Imp.gal), the left segment of the
fuel meter will start flashing, and the
odometer display will automatically
change to the fuel reserve tripmeter
3-9
mode "F-TRIP" and start counting the
distance traveled from that point. In that
case, push the "SELECT" button to
switch the display between the various
tripmeter and odometer modes in the
following order:
F-TRIP → TRIP A → TRIP B → ODO
→ F-TRIP
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button for at least
one second. If you do not reset the fuel
reserve tripmeter manually, it will reset
itself automatically and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).

Fuel meter

1. Fuel meter
3