Changeover To Basic Mode/Race Mode - Yamaha WR250F Owner's Service Manual

4. To end the setting, push the "RST" button for
2 seconds or more.
TIP
• In a 30-second absence of button operation,
the setting will come to an end with the indi-
cated time.
• To reset the seconds, push the "SLCT1" but-
ton or "SLCT2" button.
Changing odometer and tripmeter A/B
(TRIP A/B)
1. Push the "SLCT2" button to change the trip-
meter display. The display will change in the
following order:
OdometerTRIP ATRIP BTRIP A
Odometer.
TIP
To reset the digits, select the tripmeter involved
and push the "RST" button for 2 seconds or
more.
MULTI-FUNCTION DISPLAY
CHANGEOVER TO BASIC MODE/RACE
EAS2GB2047
MODE
TIP
• Measurement using the timer function can be
made in RACE MODE.
• Indicator will light up as an identifier that
shows RACE MODE has been selected.
• RACE MODE cannot display the functions as
in BASIC MODE.
• Changeover to RACE MODE forces the digits
for tripmeter A (TRIP A) in BASIC MODE to be
reset.
Changeover from BASIC MODE to RACE
MODE
1. Push the "SLCT1" button and "SLCT2" but-
ton for 2 seconds or more at the same time
to change over to RACE MODE.
TIP
Changeover to RACE MODE will put manual
start measurement on standby causing
to flash. (For manual start, refer to "Putting
measurement on standby" in "RACE MODE".)
1-25
and