Yamaha YZ250F(T) Owner's Service Manual page 544

b
1
3. Install:
NOTE:
• Before applying the adhesive, wipe off
• Install the grip to the tube guide so that the
90˚
c
3
4. Install:
NOTE:
Apply the lithium soap base grease on the
throttle grip sliding surface.
5. Install:
NOTE:
Apply the lithium soap base grease on the
throttle cable end and tube guide cable wind-
ing portion.
5 - 45
HANDLEBAR
• Right grip 1
• Collar 2
Apply the adhesive on the tube guide 3.
grease or oil on the tube guide surface a
with a lacquer thinner.
grip match mark b and tube guide slot c
form the angle as shown.
• Collar 1
• Grip cap cover 2
• Throttle grip 3
• Throttle cables 1
To tube guide 2.
CHAS